Hot New Products Fuel Pump Calibration And Phasing Machine - CRS-718C common rail test bench – Common

   CRS-718C test bench can test BOSCH,DENSO,DELPHI,SIEMENS common rail pump &injector & piezo injector.

1.It test by flow sensor with more precise and stable measurement.

2.It can generate QR code.It can add EUI/EUP, C7/C9 test system to this machine(optional).

3.The data is obtained by computer,on19″ LCD screen display.
CRS-718C test bench is special device to test the performance of high-pressure common rail pump and injector, it can test common rail pump, injector of BOSCH, SIEMENS, DELPHI and DENSO and piezo injector. It tests the common rail injector and pump by flow sensor with more precise and stable measurement. And on this basis, it also can be mounted with optional EUI/EUP test system, CAT HEUI test system. Pump speed, injection pulse width, oil measurement and rail pressure are all controlled by industrial computer by real time. It contains more than 2000 kinds by computer.
CRS-718C  can fulfill the remote assistance by internet and make the maintenance easy to operate.
Feature

Main drive adopts the speed change by frequency change.
Controlled by industrial computer in real time, ARM operating system. Fulfill the remote assistance by internet and make the maintenance easy to operate.
Oil quantity is measured by flow sensor and displayed on 19〃 LCD .
It can creat BOSCH QR code.
It adopts DRV to control rail pressure which can be tested in real time and controlled automatically. It contains the high-pressure protection function.
Oil temperature is controlled by forced-cooling system.
Pulse of the injector drive signal can be adjusted.
Protection function of short-circuit.
It can add EUI/EUP, CAT C7C9 test system to this machine.
High pressure can reach up to 2500bar. 

 
Function

common rail pump test

1. test the sealing of common rail pump.
2. test the internal pressure of common rail pump.
3. test the proportional electromagnetic valve of common rail pump.
4. test the fuel delivery pump’s performance of common rail pump.
5. test the flux of common rail pump.
6. measure the rail pressure in real time.
common rail injector test

1. test the sealing of common rail injector.
2. test the pre-injection of high-pressure common rail injector.
3. test the max. oil quantity of high-pressure common rail injector.
4. test the cranking oil quantity of high-pressure common rail injector.
5. test the average oil quantity of high-pressure common rail injector.
6. test the backflow oil quantity of high-pressure common rail injector.
7. Data can be searched, printed and made into database.
8. It can creat BOSCH QR code.
EUI/EUP test (optional)
CAT HEUI test (optional)
Technical Parameter

1. Pulse width: 0.1-5ms;
2. Fuel temperature: 40±2℃;
3. Rail pressure: 0-2200 bar;
4. Test oil filtered precision: 5μ;
5. Input power: AC 380V/50HZ/3Phase or 220V/60HZ/3Phase;
6. Rotation speed: 100~4000RPM;
7. Oil tank capacity: 60L;
8. Flywheel inertia’s moment: 0.8KG.M2;
9. Center height: 125MM;
10. Output power: 11KW;
11. Overall dimension(MM): 2200×900×1700;
12. Weight: 900 KG.