-
CRS-918 PLUS common rail injector and pump test bench
CRS-918 PLUS test bench is multifunctional device to test the performance of high-pressure common rail pump and injector; it can test common rail pump, injector of BOSCH, SIEMENS, DELPHI and DENSO and piezo injector. It simulates the injection principle of common rail motor completely and the main drive adopts the most advanced speed change by frequency change. High output torque, ultra low noise. It tests the common rail injector and pump by flow sensor with more precise and stable measurement. It can add EUI/EUP test system and CAT C7 C9 , test CAT 320D common rail pump, CAT hydraulic middle pressure actuation pump and mechanical fuel injection pump. Pump speed, injection pulse width, oil measurement and rail pressure are all controlled by industrial computer by real time. The data is also obtained by computer. 19〃 LCD screen display makes the data more clear, more than 6000 kinds of data can be searched and used. It’s with advanced technology, steady performance, precise measurement and convenient operation.
This model can fulfill the remote assistance by internet and make the maintenance easy to operate.
-
CRS-918C common rail test bench
CRS-918C test bench can test common rail pump, injector of BOSCH, SIEMENS, DELPHI and DENSO and piezo injector,mechanical fuel pump,CAT 320D common rail pump.
It can add function: EUI/EUP, CAT HEUI C7 C9, CAT hydraulic middle pressure actuation pump, VP37,VP44,RED4,QR,BIP. -
CRS-826C common rail test bench
CRS-826C test bench can test common rail pump, injector of BOSCH, SIEMENS, DELPHI and DENSO and piezo injector,mechanical fuel pump,CAT 320D common rail pump.
It can add function: EUI/EUP, CAT HEUI C7 C9, CAT hydraulic middle pressure actuation pump, VP37,VP44,RED4,QR,BIP. -
CRS-825C common rail test bench
CRS-825C test bench is special device to test the performance of high-pressure common rail pump and injector, it can test common rail pump, injector of BOSCH, SIEMENS, DELPHI and DENSO and piezo injector. It can add EUI/EUP test system and CAT C7 C9 , test CAT 320D common rail pump.
-
CRS-728C common rail test bench
CRS-728C test bench is special device to test the performance of high-pressure common rail pump and injector, it can test common rail pump, injector of BOSCH, SIEMENS, DELPHI and DENSO and piezo injector.
It can add EUI/EUP test system and CAT C7 C9 , test CAT 320C common rail pump.
test VP44 VP37 RED4
-
CRS-718C common rail test bench
CRS-718C common rail test bench
CRS-718C test bench is special device to test the performance of high-pressure common rail pump and injector, it can test common rail pump, injector of BOSCH, SIEMENS, DELPHI and DENSO and piezo injector. It tests the common rail injector and pump by flow sensor with more precise and stable measurement. And on this basis, it also can be mounted with optional EUI/EUP test system, CAT HEUI test system.
-
CRS-708S common rail test bench
CRS-708S test bench is special device to test the performance of high-pressure common rail pump and injector, it can test common rail pump, injector of BOSCH, SIEMENS, DELPHI and DENSO and piezo injector. It tests the common rail injector and pump by flow sensor with more precise and stable measurement. And on this basis, it also can be mounted with optional EUI/EUP test system, CAT HEUI test system. Pump speed, injection pulse width, oil measurement and rail pressure are all controlled by industrial computer by real time. It contains more than 2900 kinds by computer.
CRS-708S can fulfill the remote assistance by internet and make the maintenance easy to operate.
-
CRS-708C common rail test bench
CRS-708C test bench is special device to test the performance of high-pressure common rail pump and injector, it can test common rail pump, injector of BOSCH, SIEMENS, DELPHI and DENSO and piezo injector. It tests the common rail injector and pump by flow sensor with more precise and stable measurement. It can add EUI/EUP system and HEUI system.
-
CRS-700 common rail test bench
CRS-700 is a newly developed specialized device for testing the performance of four high-pressure common rail injectors. It can test common rail injectors manufactured by BOSCH, SIEMENS, DELPHI, and DENSO. This device completely simulates the injection system principle of a high-pressure common rail engine. The main drive utilizes variable frequency speed control technology, featuring high output torque, ultra-low noise, and stable rail pressure detection.
The device uses an industrial computer for real-time data acquisition. A 21-inch LCD screen provides clearer display, and over 7000 types of debugging data can be queried and printed (optional). The test bench uses drive signal modulation, ensuring high control precision and reliable, stable operation. The casing is CNC machined for a beautiful and durable finish.
This device enables remote fault diagnosis, making after-sales service faster and more convenient.
-
CRS-618C Pro common rail injector and pump test bench
The CRS-618 PRO high-pressure common rail test bench is the latest integrated equipment to test the performance of high-pressure common rail pumps and injectors produced by most manufacturers (BOSCH, DENSO, DELPHI, SIEMENS). This equipment completely simulates the injection system principle of a high-pressure common rail engine. The main drive adopts advanced frequency conversion speed regulation technology, with large output torque and ultra-low noise.
The detection of common rail pumps and injectors uses imported flow sensors, which have fast testing speed, more accurate and stable measurement; strong scalability, can be grafted to EUI/EUP system and CAT HEUI system for middle pressure C7/C9. It can detect CAT 320D common rail pumps too. The equipment uses industrial computers to control real-time data collection. The 19″ LCD screen displays more clearly. It has more than 4,000 kinds of injector debugging data, which can be queried and printed (optional).
CRS-618 PRO adopts a new design concept, innovative modular design, new appearance design and new generation control system, making a qualitative leap forward from the traditional common rail pump and common rail injector test bench.
This equipment can realize remote diagnosis of faults and make after-sales service faster and more convenient.
-
CRS-668C common rail injector and pump test bench
CRS-668C test bench is special device to test the performance of high-pressure common rail pump and injector, it can test common rail pump, injector of BOSCH, SIEMENS, DELPHI, CUMMINS and DENSO and piezo injector. This equipment fully simulates the injection system principle of a high-pressure common rail engine. The main drive adopts advanced variable frequency speed control technology which has high output torque and ultra-low noise. The common rail pump and injector are tested with imported flow sensors, which have high test speed, more accurate and stable measurement. It can test the Carter 320d common rail pump. The test bench controls the oil pump speed, injection pulse width, oil metering, and rail pressure in real time by an industrial computer. The 21-inch LCD screen has a clearer display and has more than 6,000 types of debugging data that can be queried and printed (optional). It is reliable and stable, with high control precision. The outer shell is manufactured by CNC equipment, which is beautiful and durable.
CRS-668C can fulfill the remote assistance by internet and make the maintenance easy to operate.
-
CRS-618C common rail test bench
CRS-618C test bench is special device to test the performance of high-pressure common rail pump and injector, it can test common rail pump, injector of BOSCH, SIEMENS, DELPHI and DENSO and piezo injector. It tests the common rail injector and pump by flow sensor with more precise and stable measurement. It can add EUI/EUP system and CAT 320D pump.
-
CRS-368C common rail test bench
CRS-368C common rail test bench is our latest independent researched special device to test the performance of high-pressure common rail injector; it can test common rail injector of BOSCH, SIEMENS, DELPHI, DENSO and CUMMINS. It simulates the injection principle of common rail motor completely and the main drive adopts the speed change by frequency change. High output torque, ultra low noise, rail pressure stable.
-
CRS-328C common rail test bench and HEUI C7 C9 test ...
CRS-328C common rail test bench and HEUI C7 C9 test bench
it can test common rail injector of BOSCH, SIEMENS, DELPHI and DENSO, also can test C7/C9 HEUI hydraulic common rail injector.
-
CRS-318C common rail injector test bench
CRS-318C test bench is special device to test the performance of high-pressure common rail pump injector, it can test common rail injector of BOSCH, SIEMENS, DELPHI and DENSO and piezo injector. It tests the common rail injector by flow sensor with more precise and stable measurement. It contains more than 2900 kinds by computer and albe to add BIP and QR code function.
-
CRS-308C common rail injector tester
CRS-308C common rail injector tester
it can test common rail injector of BOSCH, SIEMENS, DELPHI and DENSO. as well as piezo injector.
BIP function, QR code available.
-
CRS-200C common rail injector test bench
CRS-200C common rail injector test bench
it can test common rail injector of BOSCH, SIEMENS, DELPHI and DENSO as well as piezo injector by flow meter sensor.
-
CRS-206C common rail injector tester
CRS-206C common rail injector tester
it can test common rail injector of BOSCH DENSO SIEMENS DELPHI CAT Cummins, as well as piezo injector.
BIP functin, QR code function available.
Windows operating system, Linux operating system both available.
WiFi-connection, remote support.
-
CRS-205C common rail injector test bench
CRS-205C common rail injector test bench
it can test common rail injector of BOSCH, SIEMENS, DELPHI and DENSO , as well as PIEZO injector.
-
EUI-200 test bench
EUI-200 is the specialized equipment for testing the performance of EUI/EUP, it doesn’t need any other equipment, it can drive the cambox to work directly.
-
HU-200 test bench, EUI-EUP & HEUI C7 C9 system...
HU-200 test bench to test EUI-EUP & HEUI C7 C9 system test bench together. it can test EUI/EUP of BOSCH, CUMMINS, DELPHI, CAT, VOLVO, SCNIA, etc. and also test Caterpillar C7/C9 HEUI hydraulic common rail injector.
-
CU-200 common rail injector and EUI/EUP test bench
CU-200 is the specialized equipment for testing the performance of common rail injector and EUI/EUP. It can test common rail injectors of BOSCH, SIEMENS, DELPHI, DENSO, and EUI/EUP of BOSCH, CUMMINS, DELPHI, CAT, VOLVO, SCNIA and etc. It’s equipped with the newest cambox.
-
HEUI-200 CAT C7 C9 test bench
HEUI-200 CAT C7 C9 test bench
HEUI-200 is the specialized equipment for testing the performance of HEUI injector
-
COM-1800S EUI EUP TEST BENCH
COM-1800S tester is the latest generation of professional tester developed by our company for the control and testing of EUI/EUP. It is an indispensable electronic control instrument for testing the standards and functions of EUI/EUP. The controller is installed on a traditional test bench, and the test bench provides power and test oil, which can test the EUI/EUP.
The instrument is easy to operate, stable in function, convenient to maintain, high in quality and low in price. It is a powerful assistant in repairs.
-
COM-EUI/EUP TEST BENCH
COM-EUI/EUP is the professional tester for EUI/EUP. This tester needs to be installed on the test bench, and test oil is provided by the test bench too.
-
CAT actuate pump test equipment COM-HUP
CAT actuate pump test equipment COM-HUP
